Roland V-Drums TD-50X Reference Manual page 58

Settings
[F3] (MONITOR) button
This lets you check the output volumes for each jack.
* For details on the Master Out parameter for OUTPUT ROUTING,
refer to "Data List" (PDF).
Strike a pad or press the cursor buttons [ K ] [ J ] to select
3 .
the pad or function that you want to configure.
Indication Explanation
K KICK
S
SNARE
1–4 TOM 1–3
H HI-HAT
Indication Explanation
OH
Overhead
RM Room
MFX1–3 Multi-effect 1–3 (p. 33)
SONG
Song (p. 18)
Click (p. 17) and song click track (p. 21)
CLICK
output
MIXIN Sound that is input to the MIX IN jack (p. 18)
Sound that is input to the USB COMPUTER port
USB IN MAIN, SUB
(p. 44)
Use the cursor [ H ] [ I ] buttons, the [-] [+] buttons, or the
4 .
dial to select the output destination.
MEMO
To return to the default values, press the [F4] (DEFAULT) button.
Also, when the [F2] (DIRECT) button is selected on page 1 (PAD
OUTPUT) and you press the [F4] (DEFAULT) button, you can select
the default values (factory default settings) and one more output
setting (STEREO ALL).
To restore the settings to their default values (factory default
settings), select "DEFAULT"; and to select one more output setting,
use the cursor buttons to select "STEREO ALL" and then press the [F5]
(RESET) button.
5 . Press the [KIT] button to return to the DRUM KIT screen.
58
Indication Explanation
C CRASH 1, 2
R
RIDE
A AUX 1–4
Output destination setting examples
Here are some examples of output destination settings.
MEMO
The MASTER OUT jacks (XLR type) and DIRECT OUT jacks (1/4-inch
TRS phone type) are balanced outputs. The MASTER OUT jacks (1/4-
inch TRS phone type) are unbalanced outputs (p. 11).
Example 1: Default settings
With these settings, all sound is output from the PHONES and MASTER
OUT jacks for monitoring.
The sound from each pad is divided up and output to the DIRECT OUT
1–8 jacks, which signals are sent to your PA system.
Connector Output setting Example destination
PHONES All
MASTER OUT All
DIRECT OUT 1
KICK
DIRECT OUT 2 SNARE
DIRECT OUT 3 HI-HAT
DIRECT OUT 4
RIDE
TOM 1–4
DIRECT OUT 5/6
(Stereo)
CRASH 1,
DIRECT OUT 7/8
2, AUX1–4
(Stereo)
Example 2) Sending the same audio for monitoring
and PA
With these settings, the same sound will be output from the PHONES
jacks, the MASTER OUT jacks, and the DIRECT OUT (7, 8) jacks.
The sound being monitored by the performer will be the same as the
sound sent to the PA system.
* The master compressor and master EQ effects are not applied to
DIRECT OUT.
Connector Output setting Example destination
All
PHONES
All
MASTER OUT
−
DIRECT OUT 1
−
DIRECT OUT 2
DIRECT OUT 3 −
−
DIRECT OUT 4
−
DIRECT OUT 5/6
All
DIRECT OUT 7/8
Monitor headphones
Drum monitor
PA (external mixer)
Monitor headphones
Drum monitor
−
−
−
−
−
PA (external mixer)