Playing Brushes [F3 (Brush)]; Disabling The Pad Pattern Function [F4 (Pad Ptn)]; Naming A Drum Kit [F3 (Name)]; Effects On And Off Switches [F4 (Fx Sw)] - Roland TD-12 Owner's Manual

Percussion sound module v-drums
Hide thumbs Also See for TD-12:
Table of Contents

Advertisement

Chapter 1. Drum Kit Settings [KIT]

Playing Brushes [F3 (BRUSH)]

In each kit, you can choose whether sticks or brushes will be
used.
fig.01-005_70
Parameter
Value
Brush
OFF, ON
Switch
* Select an instrument from the Drum Instrument List (p. 88)
with "*BRUSH" appended to the name.
When Brush Switch is set to "ON," the brush icon
appears in the "DRUM KIT" screen.
fig.01-005_70
Disabling the Pad Pattern Function
[F4 (PAD PTN)]
You can switch the Pad Pattern function setting on and off for
each individual kit.
fig.01-PadPtnSw_70
Parameter
Value and Description
PadPtn
ALL PADS OFF:
Master Sw
Pad Pattern function not used
ON:
Pad Pattern function used
Naming a Drum Kit
[F3 (NAME)]
Each kit's name can use up to 12 characters.
fig.01-005_70
32
Description
OFF: for using sticks
ON: for using brushes
1. Press [KIT] - [F3 (NAME)].
The "DRUM KIT NAME" screen appears.
2. Press [CURSOR (left/right)] to move the cursor
to the character to be changed.
3. Use [VALUE], [+/-], or [CURSOR (up/down)] to
change the character.
Function Buttons
[F1 (INSERT)]: A blank space is inserted at the cursor
position, and characters after this point are
moved to the right one space.
[F2 (DELETE)]: Character at the cursor position is deleted,
and characters after this point are moved to
the left one space.
[F3 (SPACE)]: Character at the cursor position is replaced
by a blank space.
[F4 (CHAR)]:
Type of character at the cursor position
changes between uppercase/lowercase
alphabet, or numbers and symbols.
Effects On and Off Switches
[F4 (FX SW)]
These switches allow you to turn all individual effects on/off
within each drum kit.
fig.04-001_70
Refer to Effects On and Off Switches [KIT] - [F4 (FX
SW)] (p. 40).
Playing Cross Stick
[F5 (XSTICK)]
In each kit, you can choose to use/not use cross stick by
pressing [F5 (XSTICK)] in the "DRUM KIT" screen.
You can also switch this with the pads (p. 76).
• Cross-stick sound played
fig.01-007_70
• Cross-stick sound not played
fig.01-008_70
* Select an instrument from the Drum Instrument List (p. 88)
with "*X" appended to the name.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents