Epson TM-m30 Technical Reference Manual page 70

4
Close the roll paper cover.
The status sheet is printed. After printing, the printer returns to the standard mode.
70
• After the status sheet is printed, only the print settings of the mainly connected interface are
retained. For the mainly connected interface, see
25.
• Ethernet and Wi-Fi status sheets are not printed while the printing communication protocol is
being established. They will be printed after the connection is cut off (including being cut due to
a time out).
• The Bluetooth status sheet is not printed if status sheet printing is performed under the
following conditions.
* Bluetooth is connected when the Bluetooth security is set to "Medium" or "High"
* An error occurs when the Bluetooth security is set to "Medium" or "High"
* Time between when a pairing request is received and Passkey printing starts when the
Bluetooth security is set to "High"
• The Bluetooth status sheet is not printed if either of the following conditions occur during the
time from when the Paper LED flashes until the cover is closed when using the Feed button to
print the status sheet.
* The cover remains open for 1 minute when the Bluetooth security is set to "Medium" or "High"
* Bluetooth is disconnected
• "(none)" is printed for the "Connected Peripheral" if no peripherals are connected to the USB
downstream port connector.
"Printing Using Multiple Interfaces" on page