Epson TM-m30 Technical Reference Manual page 40

Setting up from a Windows Computer
Necessary Items
Prepare the following items.
• Computer for setting: Windows 10/8/7/Vista
• Utility for setting: EpsonNet Config or EpsonNet Config (Web version)
Follow the steps below to connect the printer.
1
Turn on the printer.
After starting the printer, check that the "SimpleAP Start" is printed.
If it is not printed, you need to start up SimpleAP mode in interface setup mode. For details, see
"Interface Setup Mode" on page
2
Activate Windows Wireless Network Connection and select [EPSON_Printer] as the
connection device on the screen that appears.
If the window to enter a pass phrase appears, enter "12345678".
Default settings on printer are the following values.
Network mode
SSID
Pass phrase
IP Address
3
When connecting to the printer is complete, setup the Wireless LAN using the
network setup tool, EpsonNet Config or EpsonNet Config (Web version).
For details about EpsonNet Config, see
For details about EpsonNet Config (Web version), see
on page 57.
4
When setting the Wireless LAN is complete, restart the printer.
40
Computer equipped with a wireless LAN function
65.
SimpleAP mode
EPSON_Printer
12345678
192.168.192.168
"Setup using EpsonNet Config" on page 56.
"Setup using EpsonNet Config (Web version)"