Epson TM-m30 Technical Reference Manual page 37

4
When charging smart devices or USB devices with Onboard USB Powers Tablet
model, connect the cable to the USB connector for charging.
• Make sure you use the genuine cable for the tablet, smartphone, or USB device you are
• Depending on how the device is being used, it may not charge to 100%.
• It may take a few seconds before charging starts as the device searches for the most
• Charging may not be performed depending on the device's charging specifications.
• Charging stops if it exceeds the rating for the USB connector.
• It may be hard to disconnect some types of USB cable. Do not forcibly pull the cable, or the
5
Insert the AC plug into a socket.
6
Turn on the printer.
using.
suitable amperage.
USB connector and USB cable may be damaged. Contact qualified service personnel if you
encounter the trouble.
Chapter 2 Setup
2
37