Printing a Status Sheet
Follow the steps below to check the interface settings.
Using the Status Sheet Button
1
Check that the printer is turned on.
Make sure the roll paper cover is closed.
2
If there is a bottom cover, remove the cover.
See
"Removing the Covers" on page 93
3
Hold down the status sheet button for at least three seconds.
The status sheet is printed. After printing, the printer returns to the standard mode.
Using the Feed button
1
Check that the printer is on.
2
Open the roll paper cover.
3
Hold down the Feed button for at least one second.
You cannot print after turning on the power while the Power LED is flashing.
for details on removing the bottom cover.
For ESC/POS firmware version 1.13 or earlier, press and hold for 3 seconds or longer.
Chapter 3 Advanced Usage
69
3