Epson TM-m30 Technical Reference Manual page 112

When using OT-WL05:
• IEEE802.11b (2.4 GHz)
• IEEE802.11g (2.4 GHz)
• IEEE802.11n (2.4 GHz)
• IEEE802.11a (5 GHz)
• IEEE802.11n (5 GHz)
When using OT-WL06
• IEEE802.11b (2.4 GHz)
• IEEE802.11g (2.4 GHz)
• IEEE802.11n (2.4 GHz)
• IEEE802.11a (5 GHz)
• IEEE802.11n (5 GHz)
• IEEE802.11ac (5 GHz)
Security
Security can be selected from among the following:
• WEP*
• WPA-PSK(AES)
• WPA2-Personal
• WPA2-Enterprise
*: OT-WL06 does not support WEP.
Initial settings
These settings apply when the printer is initialized in the Interface Setup mode.
Communication standard
Network mode
SSID
Encryption type
Passphrase
IP Address
∗You can connect to a WPA2-PSK (AES) access point using the settings above.
Settings in SimpleAP mode (Factory default settings)
SSID
Passphrase
IP Address
Subnet mask
∗In SimpleAP mode, DHCP Server is working and assign IP address to host automatically.
112
Parameter
Parameter
Setting value
802.11b/g/n
Infrastructure mode
EPSON_Printer
WPA2-Personal
EpsonNet
Automatically acquired by DHCP
Setting value
EPSON_Printer
12345678
192.168.192.168
255.255.255.0