Table of Contents
Advertisement
Available languages
Available languages
6 WHEELCHAIR OPERATION
6.7
Installing/Removing Elevating Legrests
MyOn and MyOn Active
For this procedure, refer to FIGURE 16 on page 52 and FIGURE 17 on page 53.
For maintenance and/or adjustment procedures, refer to Troubleshooting and Maintenance on page 58.
Installing
1.
Place elevating legrest (A) on the outside of the wheelchair and insert mounting pin (B) of the legrest into the mounting tube (C) of the wheelchair.
2.
Rotate elevating legrest toward the inside of the wheelchair until it locks in place.
The calfpad (D) of the legrest will be on the inside of the wheelchair when locked in place.
3.
Repeat STEPS 1-2 for the other elevating legrest assembly.
FIGURE 16
Invacare® MyOn®
A
B
Installing/Removing Elevating Legrests - MyOn and MyOn Active - Installing
52
C
D
Part No 1167417
Advertisement
Table of Contents
