Am Display Module/Description - Wolf CGS-2-14/120L Installation Instructions Manual

AM overview
Quick start keys
Key 1
Key 2
Key 3
Key 4
Key 1
Key 2
Key 3
Key 4
36
19. AM display module/description
Note:
If your Wolf heating appliance is not equipped with an AM display mod-
ule, ignore this page.
Further functions and descriptions can be found in the installation
instructions for contractors
or the user operating instructions for the AM display module.
Status display
Operating mode
Heating mode
Burner status
ON
Burner ON
Heating appliance pump ON
Set heating appliance temperature
(if BM-2 as remote control - no function)
Set DHW temperature
(if BM-2 as remote control - no function)
Enable emissions test mode
(for flue gas inspector only)
Acknowledge fault / End / Back
Status
Heating appliance in heating mode
Rotary selector
with pushbutton
function
3064816_201804