Casing - Wolf CGS-2-14/120L Installation Instructions Manual

Casing

First, grip the control unit cover on the r.h. side and swivel to
the side. Then undo the two screws on the r.h. and l.h. sides
of the front casing. The front casing can then be released at
the top and removed.
To remove the cylinder front casing, undo the two screws on
the r.h. and l.h. sides.
The casing can then be pulled forwards and removed.
3064816_201804
7. Casing
Fig.: Front view, control unit cover open
Fig.: Dismantling the stratification cylinder front casing
SW 4
15