Assembly Replacement
A6 Power Supply
A6 Power Supply
Use ESD precautions when performing this replacement procedure.
CAUTION
Removal
1. Remove the instrument top brace. Refer to the
2. Refer to
3. Carefully pull up on the power supply assembly to disengage from
Figure 4-8
Power Supply Removal
180
procedure.
Figure
4-8. Using the T-10 driver, remove the 5 screws (1)
securing the A6 power supply assembly (2)to the deck and the rear
frame.
the motherboard connector.
"Top Brace"
removal
Chapter 4