Procedure - Agilent Technologies E4406A VSA Series Service Manual

Procedure

Capturing Critical Data
If possible, it is best to capture the critical information described above
from the instrument before replacing the Flash memory board. Ensure
that all information is recorded exactly as it is displayed.
1. To view the host name and IP address, press
2. To view the license key number, press
NOTE
If the instrument is not functional, contact the owner for the license key
numbers. The user's guide has a table in the "Getting Started" section
where the end user may have recorded the license key numbers. Also,
the end user may have the License Key Certificate that has the license
key number on it. Additionally, you may contact Agilent Technologies
sales and service office for the information. To contact the Agilent
Technologies sales and service office, refer to
Technologies" on page
Replacing the Flash Memory Assembly
If the Flash Memory board has not been replaced already, refer to
assembly replacement procedure
A22A3 GP-IB Capacitor Boards" on page 205
the defective Flash memory board.
Chapter 5
Configuring a Replacement Flash Memory Assembly
Configure I/O
.
Install
displayed, , and
activated. For an explanation on the use of the alpha editor, refer to
"Using the Alpha Editor Menu" on page
When capturing the license key number, it is very important to copy
the number accurately. Since it is a hexadecimal, the letter "O" can
not be present, only zeros "0" are used in the license key number.
a. To determine if the BAC (cdmaOne) option is loaded, type BAC and
Done
press . The key number will appear on the License Key.
Choose Option
Then press
b. To determine if the BAH (GSM) option is loaded, type BAH and
Done
press . The key number will appear on the License Key.
Choose Option
Then press
60.
System
Choose Option
. The alpha editor will be
258.
to view additional options.
to view additional options.
"Contacting Agilent
"A22A1 DRAM, A22A2 Flash, and
Post-Repair Procedures
System
and
More
, until (3 of 3) is
for details on replacing
245