Canon imagePRESS C10000VP Practical Manual page 89

When Your Printouts Look Like���
When printing on coated paper, stripes
appear near the leading edge of the paper�
← Feeding Direction
Problems with Printouts That Look Like the Following Images
Check the Cause and Remedy Below
Cause
Toner on the leading edge of the paper is rubbed�
Remedy
• When using paper where the finishing type of the
front and back surface differs, change the direction of
the paper to improve this situation�
• To improve this situation, select [Image Quality Priority]
in [Switch Fixing Temperature Adjustment Mode]�
→ [Adjustment/Maintenance] → [Adjust
Press
Image Quality] → [Switch Fixing Temperature
Adjustment Mode] → select [Image Quality Priority
(Standard Gloss)] or [Image Quality Priority (Low
Gloss)]�
imagePRESS C10000VP/C8000VP
87