Step 3 Adjusting Margins With Creep Compensation - Canon imagePRESS C10000VP Practical Manual

Step 3 Adjusting Margins with Creep Compensation

A problem, when binding a booklet with very thick paper or many pages, is that progressively more paper is trimmed
from the pages the closer they are to the center of the booklet� If the booklet is trimmed as is, the type area position
near the center and near the covers will differ� To avoid this, type areas need to be moved slightly closer to the fore-
edges on some pages� This is called creep compensation� If the type area positions are inconsistent, check that the
creep compensation settings are correct�
Trimming Position
*1 Without creep compensation, the outer margins after the booklet is trimmed are inconsistent.
*2 With creep compensation, the outer margins after the booklet is trimmed get consistent.
1
Select the check box for <Compensate creep>, and then select a type of paper from the drop-
down list�
When making a booklet containing many pages by using plain paper
Select [Plain]�
When making a booklet by using heavy paper (heavy basis weight)
Select [Heavy]�
50 50
imagePRESS C10000VP/C8000VP