Canon imagePRESS C10000VP Practical Manual page 81

When Your Printouts Look Like���
Jagged image appears�
← Feeding Direction
Stripes parallel to the direction of feed
appear in the printout�
← Feeding Direction
Problems with Printouts That Look Like the Following Images
Check the Cause and Remedy Below
Cause
The speed of the secondary transfer belt is not suitable�
Remedy
To improve this situation, adjust the value for <Adj� Sec�
Transfer Belt Speed> to match the specific characteristics
of the paper� There are two types of problems: jagged
image and stripes problem� Adjust the value according
to the problem with your printout�
→ [Preferences] → [Paper Settings] → [Paper
Press
Type Management Settings] → select the type of paper
you are using that is having this problem → press
[Details/Edit] → [Change] for <Adj� Sec� Transfer Belt
Speed> to change the speed of the secondary transfer
belt� For the jagged image, set to [+], for the stripes
problem, set to [-]�
"Paper Type Management" > "Adjusting Secondary
Transfer Belt Speed" in the e-Manual
imagePRESS C10000VP/C8000VP
79