When Your Printouts Look Like���
When printing on coated paper, uneven
glossiness that looks like rain fall appears
on the leading edge of the image�
← Feeding Direction
80
80
imagePRESS C10000VP/C8000VP
Check the Cause and Remedy Below
Cause
The toner cannot fix to the paper because too much
water vapor is evaporating from the surface of the paper�
Remedy
• Locate the machine in a room that has consistent
and suitable temperature and humidity�
Keep the paper in the same environment as
that where the machine is located� For the
appropriate temperature and humidity, see the
Installation and Operating Environment Guidelines or the
Specialty Media Handling Guide�
• To improve this situation, adjust the value for <Adjust
Gloss/Fine Black> to match the specific characteristics
of the paper�
→ [Preferences] → [Paper Settings] → [Paper
Press
Type Management Settings] → select the type of
paper you are using that is having this problem →
press [Details/Edit] → [Change] for <Adjust Gloss/Fine
Black> → adjust the value for [Gloss] toward the minus
end�
"Paper Type Management" > "Adjusting the Gloss
and Fine Black" in the e-Manual