Canon imagePRESS C10000VP Practical Manual page 85

When Your Printouts Look Like���
Uneven glossiness that is perpendicular to
the direction of feed occurs�
On the first sheet, there is a very glossy area that
reaches 252 mm (9 7/8") from the leading edge�
252 mm (9 7/8")
High Gloss Low Gloss
On the second and following sheets, there is a
very glossy bar within the area that reaches 252
mm (9 7/8") from the leading edge�
252 mm (9 7/8")
Low Gloss High Gloss Low Gloss
← Feeding Direction
Problems with Printouts That Look Like the Following Images
Check the Cause and Remedy Below
Cause
Temperature for fixing toner does not match the specific
characteristics of the paper�
Remedy
To improve this situation, adjust the value for <Adjust
Gloss/Fine Black> to match the specific characteristics of
the paper�
→ [Preferences] → [Paper Settings] → [Paper
Press
Type Management Settings] → select the type of paper
you are using that is having this problem → press
[Details/Edit] → [Change] for <Adjust Gloss/Fine Black>
→ adjust the value for [Gloss] toward the minus end�
"Paper Type Management" > "Adjusting the Gloss
and Fine Black" in the e-Manual
imagePRESS C10000VP/C8000VP
83