How To Make Transparency Effects Work As; Expected; For Rgb Color Mode - Canon imagePRESS C10000VP Practical Manual

How to Make Transparency Effects Work
As Expected
If you specify a transparency setting to make the overlapping
part of multiple objects transparent or to print the object with
a drop shadow, the printouts may differ from what you expect�
For example, the transparent part may have a different color,
or a box may appear around the shadow and transparency on
the printout� In these cases, check the color mode of the data
you are printing� Is it RGB or CMYK? Then, follow the procedures
described below� This may help eliminate your problems�
• For RGB Color Mode (p� 26)
• For CMYK Color Mode (p� 27)

For RGB Color Mode

The following procedure is possible only when the data is a PDF file�
1
Double-click the job in Command WorkStation on the imagePRESS Server�
• [Job Properties] is displayed�
2
Select the [Color] tab, and then select the check box for <Optimize RGB transparency>�
3
Click [OK]�
• Print a test sheet to check the finished result� If you are satisfied with the result, you can print the job�
26 26
imagePRESS C10000VP/C8000VP