Fiat 500 Owner's Handbook Manual page 204

"Map": navigation map view
(Uconnect™ 7" HD Nav LIVE
versions only).
At the bottom: information on the
track being played and the following
graphic buttons:
Active device or audio source;
/ : select previous/next
track;
: pause track being played;
"Audio": access to the "Audio
Settings" screen.
Track selection
Use this function to scroll through and
select the tracks on the active device.
The choices available depend on the
device connected. For example, on
a USB device, you can also use the
SCROLL TUNE button/knob to scroll
through the list of artists, genres and
albums available on the device,
depending on the information available
in the tracks.
Turn the SCROLL TUNE button/knob to
select the desired category and then
press the button/knob to confirm the
selection.
NOTE The indexing time of a USB
device can vary according to the media
inserted (in some cases it can take a
few minutes).
202
NOTE The Uconnect™ system may
not support some USB keys: in this
case, it will not automatically switch
from "Radio" mode to "Media" mode. If
the device used does not play, verify
its compatibility by selecting Media
mode: a dedicated message will
appear on the Uconnect™ system
display.
Bluetooth® SOURCE
This mode is activated by pairing a Blu-
etooth® device containing music
tracks with the system.
PAIRING A Bluetooth® AUDIO
DEVICE
To pair a Bluetooth® audio device,
proceed as follows:
activate the Bluetooth® function on
the device;
press the "Media" button on the
display;
press the "Select Source" button;
select the Bluetooth® Media
source;
press the "Add device" button;
search for "Uconnect" on the Blu-
etooth® audio device (during pairing, a
screen showing the progress is dis-
played);
when requested by the audio
device, enter the PIN code shown on
the system display or confirm on the
device the PIN displayed;
if the pairing procedure is completed
successfully, a screen is displayed.
Answer "Yes" to the question to pair the
Bluetooth® audio device as favourite
(the device will have priority over all
other devices to be paired subse-
quently). If "No" is selected, the priority
is determined according to the order of
connection. The last device connected
will have the highest priority;
an audio device can also be paired
by pressing the "Phone" graphic button
on the display and by selecting
"Settings" or selecting "Phone/
Bluetooth®" from the "Settings"
menu.
IMPORTANT If the Bluetooth® con-
nection between mobile phone and
system is lost, consult the mobile
phone handbook.
NOTE When modifying the name-
device in the Bluetooth® settings of
the phone (where provided), the Radio
may change the track being played if
the device is connected via USB after
the Bluetooth® connection.