Fiat 500 Owner's Handbook Manual page 142

Hide thumbs Also See for 500:
Table of Contents

Advertisement

SERVICE SCHEDULE
WARNING: Once you have carried out the last intervention in the table, continue with the scheduled servicing, maintaining the
frequency indicated in the plan by marking each operation with a dot or dedicated note.
Warning: simply restarting the maintenance from the start of the plan may cause the allowed interval to be exceeded for some
operations!
Thousands of miles
Thousands of kilometres
Years
Check tyre condition/wear and adjust pressure, if
necessary; check the expiry date of the "Fix&Go" repair kit
(for versions/markets, where provided)
Check operation of lighting system (headlights, direction
indicators, hazard warning lights, boot, passenger
compartment, glove compartment, instrument panel
warning lights, etc.)
Check and, if necessary, top up fluid levels (1)
Check exhaust emissions
Use the diagnosis socket to check supply/engine
management system operation, emissions and, for
versions/markets, where provided, engine oil degradation
Visually inspect the condition of: bodywork, underbody
protection, pipes and hoses (exhaust - fuel - brakes),
rubber parts (boots, sleeves, bushes, etc.)
Check windscreen/rear window wiper blade position/wear
(for markets/versions, where provided)
(1) Topping up must be carried out with the fluids indicated in this Owner Handbook and only after checking that the system is undamaged
140
9
18
27
36
45
15
30
45
60
75
1
2
3
4
5
54
63
72
81
90
90
105
120
135
150
6
7
8
9
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents