Fiat 500 Owner's Handbook Manual page 189

Switching the system
on/off
The system is switched on/off by
pressing the (ON/OFF) button/knob.
Turn the button/knob clockwise to
increase the radio volume or
anticlockwise to decrease it.
Radio mode
After the desired radio station is
selected, the following information is
shown on the display:
At the top: the list of radio stations
stored (preset) is displayed; the station
currently playing is highlighted.
In the middle: display of the name of
the current radio station and the
buttons for selecting the previous or
next radio station.
At the bottom: display of the following
buttons:
"Browse": list of the radio stations
available;
"AM/FM", "AM/DAB", "FM/DAB":
selection of the desired frequency band
(button reconfigurable according to
the band selected: AM, FM or DAB);
"Tune": manual radio station tuning
(not available for DAB radio)
"Info": additional information on the
source being listened to;
"Audio": access to the "Audio
Settings" screen.
Audio menu
The following adjustments can be
carried out using the "Audio" menu:
"Equaliser" (where provided);
"Balance" (left/right audio balance
adjustment);
"Speed/Volume" (speed-dependent
automatic volume control);
"Loudness" (where provided);
"Auto-On Radio";
"Radio Off Delay".
To exit the "Audio" menu, press the
Done button.
Media mode
Audio source selection
Press the "Source" button to select the
desired audio source among those
available: USB or Bluetooth®.
Applications used on portable devices
may be not compatible with the
Uconnect™ system.
Track selection (Browse)
With Media mode active, briefly press
buttons / to play the
previous/next track or keep buttons
/ pressed to fast rewind/
forward the track.
NOTE The keyboard is not available for
languages not supported by the system
which feature special characters (e.g.
Greek). In these cases this function will
be limited.
NOTE The Uconnect™ system may
not support some USB keys: in this
case, it will not automatically switch
from "Radio" mode to "Media" mode. If
the device used does not play, verify
its compatibility by selecting Media
mode: a dedicated message will
appear on the Uconnect™ system
/
display.
Bluetooth® source
Pairing a Bluetooth® audio device
To pair a Bluetooth® audio device,
proceed as follows:
activate the Bluetooth® function on
the device;
press the MEDIA button on the front
panel;
if the "Media" source is active, press
the "Source" button;
select the Bluetooth® Media
source;
press the "Add Device" button;
search for Uconnect™ on the Blu-
etooth® audio device (during the pair-
ing stage a screen is displayed showing
the progress of the operation);
187