Snmp; Settings - 3Com OfficeConnect 3CDSG8 User Manual

Managed gigabit switch

Hide thumbs Also See for OfficeConnect 3CDSG8:

Table of Contents

SNMP

This page allows you to configure the Simple Network Management Protocol (SNMP). The

SNMP agent permits the switch to be managed from any system in the network using

management software. You can set the following options:

• SNMP Enabled -Activate or deactivate SNMP.

• SNMP Trap Destination - IP address of the trap manager.

Traps indicating status changes are issued by the switch to specified trap managers. You

must specify trap managers so that key events are reported by this switch to your

management station. SNMP trap destination specifies the IP address of the trap manager.

• SNMP Read Community - A community string that acts like a password and permits

access to the SNMP protocol. The read community string specifies read-only access.

Authorized management stations are only able to retrieve MIB

objects.

• SNMP Write Community - Specifies read-write access. Authorized management stations

are able to both retrieve and modify MIB objects.

• SNMP Trap Community - Community string sent with the notification operation.

There are three main buttons associated with this page:

• HELP - Displays this text.

Table of Contents

Show Quick Links

Table of Contents

3cdsg8-us - officeconnect managed gigabit switch