Ports; Settings - 3Com OfficeConnect 3CDSG8 User Manual

34
5

PORTS

5.1 Settings

This page allows you to configure Jumbo Frames, Speed, Duplex and Flow Control settings for
every port on the switch. It also allows the power saving modes to be configured.
• Enable Jumbo Frames - Click box to enable jumbo frames. This setting is applied to all
the ports on the switch.
The Port Configuration table has one row for each port and four columns. The columns are:
• Port - The front-panel port-number of the port. This cannot be changed.
• Speed/Duplex - A combined data-rate and duplex setting for the port.
• Flow Control - Used to control congestion and to minimize the number of dropped
packets.
There are three main buttons associated with this page:
• HELP - Displays this text.
• APPLY - Updates the switch configuration. No changes are made to the configuration
until this button is pressed.
• CANCEL - All changes made to the page are discarded and the switch configuration
remains unchanged.
Ports