Ip Address - 3Com OfficeConnect 3CDSG8 User Manual

30
• CANCEL - All changes made to the page are discarded and the switch configuration
remains unchanged.

4.2 IP Address

This page allows you to change the IP Address used by the switch.
• DHCP Enabled - If enabled, the IP Address will be assigned from the DHCP server. If
disabled, the IP Address must be assigned manually.
• Switch IP Address - The dot-separated IPv4 address used by the switch.
• Subnet Mask - The dot-separated IPv4 Subnet address used by the switch. If in doubt,
set this to be the same as the Subnet Mask used by your PC.
• Gateway IP Address - The dot-separated IPv4 Gateway address used by the switch. If in
doubt, set this to be the same as the Default Gateway address used by your PC.
Note: If DHCP is enabled, the word "Fallback" will be added to the front of the other
parameter names to indicate the usage of a manually assigned IP Address.
Note: If you change the IP address used by the switch you will lose contact with this Web
Management-Interface and may have to change the IP address on your PC to reconnect.
Note: If you forget the IP Address you can connect to the console interface and use the
IPStatus command to display it. See Page 77 for more details.
There are three main buttons associated with this page:
• HELP - Displays this text.
System