Troubleshooting - 3Com OfficeConnect 3CDSG8 User Manual

Managed gigabit switch
Hide thumbs Also See for OfficeConnect 3CDSG8:
Table of Contents

Advertisement

86
17
T
ROUBLESHOOTING
This section describes problems that may arise when installing the and how to resolve these
issue. This section includes the following topics:
• Problem Management — Provides information about problem management.
• Troubleshooting Solutions — Provides a list of troubleshooting issues and solutions
for using the device.
________________________________________________________________
Problem Management
Problem management includes isolating problems, quantifying the problems, and then applying
the solution. When a problem is detected, the exact nature of the problem must be determined.
This includes how the problem is detected, and what are the possible causes of the problem.
With the problem known, the effect of the problem is recorded with all known results from the
problem. Once the problem is quantified, the solution is applied. Solutions are found either in
this chapter, or through customer support. If no solution is found in this chapter, contact
Customer Support.
________________________________________________________________
Troubleshooting Solutions
Listed below are some possible troubleshooting problems and solutions. These error messages
include:
• Cannot connect to management using RS-232 serial connection
• Cannot connect to switch management using HTTP, SNMP, etc.
• Self-test exceeds 15 seconds
• No connection is established and the port LED is on
• Device is in a reboot loop
• No connection and the port LED is off
• Lost Password.

Troubleshooting

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3cdsg8-us - officeconnect managed gigabit switch

Table of Contents