Step 5: Flash The Devkit With The Android Os - Nvidia Tegra Ventana Hardware Setup And Android Gingerbread Install Manual

STEP 5: Flash the Devkit with the Android OS

Place the DevKit into Recovery Mode:
1) Press and hold the "Recovery" button on the left side of the devkit, near the Wifi
antenna.
2) Press the "ONKEY*" (may be marked "PWR") button for 2-3 seconds. If your Ventana
has a clear plastic rear cover, you should see the main power LEDs illuminate.
3) Release the "Recovery" button after 1-2 seconds.
February 2011 - 7 -