Appendix: Troubleshooting The Recovery Mode Driver - Nvidia Tegra Ventana Hardware Setup And Android Gingerbread Install Manual

Appendix: Troubleshooting the Recovery Mode
Driver
Flashing Produces Device Not Found
If running the flash bat file gives the output similar to:
C:\Program Files (x86)\NVIDIA Corporation\tegra_ventana_gb_20110222>"nvflash.exe" -
-bct flash.bct --setbct --bl bootloader.bin --configfile flash.cfg --odmdata
0x30000011 --create --go
Nvflash started
USB device not foundPress enter to continue:
Then try the following:
1) Ensure that the device is connected to the PC via USB
2) Ensure that the device is on and in recovery mode
Open the Device Manager and check under "Universal Serial Bus controllers". You should
see:
"NVIDIA USB Boot-recovery driver for mobile devices"
If this device is missing or has an error marker next to it, install or reinstall the driver via the
method listed in the following section Manually Install the Driver.
Flashing Halts without Completing
If the flashing process produces the following output similar to:
C:\Program Files (x86)\NVIDIA Corporation\tegra_gb_froyo_20110222>"nvflash.exe" --b
ct flash.bct --setbct --bl bootloader.bin --configfile flash.cfg --odmdata 0x300
00011 --create --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 2
chip sku: 0x8
chip uid: 0x0808104842204617
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
February 2011 - 14 -