Table of Contents
Advertisement
Flashing from Linux:
Flash your OS:
1)
Connect the USB cable from the free USB port (Type-A) on your host PC to the flashing
USB port (Mini or Micro USB, not full-sized) on the left-rear corner of the devkit.
Referred to as "Development Cable" or "ADB/USB cable".
2)
Open a shell to the directory containing the installed flashpack
(tegra_ventana_gb_<version>)
3)
Run the script ventana_flash.sh
4)
You will likely be asked to provide your super-user password if you have not already
attained "su"
5)
The output of the flashing script should be extremely similar to the windows output
shown in the previous section.
February 2011
- 10 -
Advertisement
Table of Contents
