Step 3: Setup The Connections - Nvidia Tegra Ventana Hardware Setup And Android Gingerbread Install Manual

STEP 3: Setup the Connections

Make the basic connections:
Tango Devkit
WiFi Antenna – The threaded end of the WiFi antenna should be firmly screwed onto
the WiFi antenna connector on the left side of the devkit, if not already attached as
supplied
External storage – If you have a SD card, insert it into the SD card slot on the right edge
of the devkit.
Power – Connect the supplied 15V power supply to the power jack on the top edge of
the devkit.
February 2011 - 5 -