Nvidia Tegra Ventana Hardware Setup And Android Gingerbread Install Manual page 9

Flash your OS:
1) Open an Explorer window to the Android OS support pack you installed previously. It
has the OS image in it. It should be found here:
Start Menu: All Programs: NVIDIA Corporation: Ventana Android Gingerbread:
Version <XXXXXXXX>: Platform Directory
Double click to run the flash .bat file, nvflash_1gb_lcd.bat. The flashing process
2)
will begin immediately. At the end of a successful flash, remove the USB cable
connection to the PC. If you do not, Windows will ask for another driver, please cancel
out of the "New Device Wizard". We will install this driver later. The last few lines of
a successful flash will look something like this:
sending file: bootloader.bin
\ 903580/903580 bytes sent
bootloader.bin sent successfully
sending file: boot.img
| 2529280/2529280 bytes sent
boot.img sent successfully
sending file: system.img
| 79590720/79590720 bytes sent
system.img sent successfully
Press enter to continue:
3) The device should have rebooted to the desired video out mode with the Android
desktop. If it did not, stop here and see the appendix at the end of this document on
Troubleshooting the Recovery Mode Driver.
February 2011 - 9 -