Extron electronics PVS 407D User Manual page 37

Command
VoiceLift Pro Reset
NOTE: VLR 302 receiver reboots itself after reset is complete.
Absolute System Reset, but
retains microphone pairing
Absolute System Reset
NOTE: This reset is same as the first reset, except microphone pairing is cleared.
Reboot Device
VoiceLift Pro Feedback Suppressor
Set feedback suppressor
View feedback suppressor
X4#
KEY: = Feedback suppressor
Special Function Commands
Set Line out mode
Set Line out to variable
Set Line out to fixed
View Line out mode
Set audio output mode
Set audio output mode to
dual mono
Set audio output mode to
stereo
View audio output mode
ASCII Command Response
(host to switcher) (switcher to host)
E v
1*0RSTD } Rstd • v1*0]
or Rstd*E25
or Rstd*E14
E } Rstd • v1*1]
v1*1RSTD
or Rstd*E25
or Rstd*E14
E } Rstd • v1*9]
v1*9RSTD
or Rstd*E25
or Rstd*E14
X4#
E Fsen
FSEN}
or E25
or E14
E X4#]
FSEN}
or Fsen*E25
or Fsen*E14
Fsen
Verbose mode 2/3
or Fsen*E25
or Fsen*E14
0
= Off/disable (Default)
55*1#
LineOut*1
55*2#
LineOut*2
55#
LineOut*X
18*1#
PreAmpMod*1
18*2#
PreAmpMod*2
18#
PreAmpMod*X
]
]
]
]
]
]
X4#]
]
]
]
]
X4#]
]
]
1 = On/enable
]
]
]
]
]
]
PVS 407D • SIS Communication and Control
Additional Description
Reset the system, but keep pairing.
Device is not present.
VLR 102 detected, expected VLR 302.
Reset to factory default.
Device is not present.
VLR 102 detected, expected VLR 302.
Device reboot
Device is not present.
VLR 102 detected, expected VLR 302.
Default is Off.
Device is not present.
VLR 102 detected, expected VLR 302.
View feedback suppressor status.
Device is not present.
VLR 102 detected, expected VLR 302.
E25
= Device not present/detected
Where 1 = variable (default).
Where 2 = fixed.
Where X = 1 (variable, default),
or 2 (fixed).
Where 1 = dual mono (default).
Where 2 = stereo.
Where X = 1 (dual mono, default)
or 2 (stereo).
31