Enabling And Activating Linklicense; Front Panel Security Lockout (Executive Mode) - Extron electronics PVS 407D User Manual

Enabling and Activating LinkLicense

Refer to
LinkLicense through the PVS 407D internal webpage. A couple of things to consider:
•
•
For assistance with LinkLicense activation, please contact your Extron Support
Representative.

Front Panel Security Lockout (Executive Mode)

To prevent accidental or unauthorized changes to settings, the PVS switcher has a front
panel security lockout (executive mode) that limits access to front panel controls.
When the front panel security lockout mode is active, all front panel functions are locked
except the reset button. This mode can also be turned on or off via an SIS command (see
Front panel lockout mode (executive mode)
All the input LED indicators light up for one second to indicate that executive mode has
been enabled or disabled.
To turn executive mode on or off via the front panel:
1.
2.
Figure 9.
This mode can also be turned on or off through PCS software, TCP/IP, USB, or RS-232
control.
For details, see
Help file.
LinkLicense starting on page 53 to enable and activate the Audio Decoding
PVS 407D Audio Decoding LinkLicense – The PVS 407D switcher must have
firmware 5.00 or above with the Audio Decoding LinkLicense, part 79-2558-01,
enabled to directly playback bells and announcements from GlobalViewer Campus
Communication Suite server version 2.0.0.
Audio Stream Settings – The Audio Stream settings on the PVS 407D default
webpage are disabled until the PVS 407D Audio Decoding LinkLicense is applied
to the switcher. With the LinkLicense successfully added, audio stream settings
are accessible. IP address and UDP port settings should be coordinated with your
GlobalViewer Campus Communication Suite and network administrators for proper
operation.
Press and hold the input Select button until all input LEDs blink (approximately
8 seconds).
Release the button. The LEDs go out except for the currently selected input. The
switcher has enabled or disabled the executive mode.
INPUTS
SELECT
AUDIO
1 3 5
2 4 6
AUX
Press and hold All input LEDs (including Aux) flash.
button for 8 seconds. The LEDs extinguish except for the currently selected input.
Executive mode has been enabled or disabled.
Setting the Executive Mode via the Front Panel
SIS Communication and Control
on page 25).
7
on page 19 or the PVS 407D PCS
PVS 407D Switcher • Operation 13