Functions; Factory Default; Exit - Interlogix TVB-6101 Manual

MODE
There are two mode levels, 1 and 2. Mode 1 has a warmer white light than mode 2.

Functions

Move the cursor to FUNCTIONS and click
This menu defines motion detection and privacy.
MOTION DETECTION
In the user-defined motion detection surveillance area, the moving object can be detected and
the alarm will be triggered. Up to four motion detection areas can be configured.
Select a MOTION area. Set the MODE as ON. Click the up/down/left/right button to define the
position, and the size of the area. Set the SENSITIVITY from 1 to 9.
PRIVACY
The privacy mask allows you to cover designated areas that you do not want to be viewed or
recorded. Up to four privacy areas are configurable.
Select an area. Set the MODE as ON. Click up/down/left/right buttons to define the position and
the size of the area. You can also select the color of the area and if it is to be transparent or not.
Select SAVE & EXIT to save the changes and exit the menu.

Factory Default

Move the cursor to FACTORY DEFAULT and click
factory default.

Exit

Move the cursor to EXIT and click
TruVision HD-TVI Cameras Configuration Manual
Iris+ to enter the submenu.
MOTION DET
OFF
MODE

AREA 0

AREA 1

AREA 2

AREA 3
RED
COLOR
5
SENSITIVITY
OFF
TRANSPARENCY

BACK

EXIT

SAVE & EXIT
PRIVACY
ON
MODE

AREA 0

AREA 1

AREA 2

AREA 3
RED
COLOR
OFF
TRANSPARENCY

BACK

EXIT

SAVE & EXIT
Iris+
Iris+ to exit the menu without saving.
to reset all the settings to the
13