Barco AMM215WTD User Manual page 9

How to Access the Menu
• Push the Rotary Knob button to activate the OSD menu
• Turn the Rotary Knob to the left or right to select icons. The icon will be highlighted when selected.
• Push the Rotary Knob button to go into the another OSD menu.
• Turn Rotary Knob left or right to select function.
• In order to exit from the OSD menu, choose the "Exit" icon. Hold the button around two or three seconds,
then it will completely exit from the menu regardless of where you are.
• Turn the Rotary Knob button in a quick motion to the left or right, while the menu is not activated, then input
signal menu will turns up with " ✔ "mark which is the current available input signal. You can switch to
another input signal source by turning the knob slowly then select the target source by pushing the knob.
Welcome!
R5912860 /13 AMM215WTD 9