Barco AMM215WTD User Manual page 13

To connect the Power cord
• Check first to make sure that the power cord in use is the correct type required for the area.
• This monitor has an universal AC adapter that allows operation in either AC 100 - 240 V ac voltage area.
No user-adjustment is required.
• Plug one end of the power cord to the AC adapter, plug another end to a proper AC outlet.
The cord set should have the appropriate safety approvals for the country in which the equipment will be
installed and marked HAR.
For 120 volt Applications, use only the UL Listed detachable power cord with NEMA configuration 5-15P type
(parallel blades) plug cap. For 240 volt applications use only the UL Listed detachable power supply cord with
NEMA configuration 6-15P type (tandem blades) plug cap.
Image 2–3
You can use a Bridgepower extension power cord (optional). The part numbers are: C-
47D2001P50MF (5 ft), C-47D2004P57MF (15 ft) and Z3404272 (75 ft)
To avoid damage to the unit or equipment, only connect the equipment to the HD/SD SDI optional
module
Installation
R5912860 /13 AMM215WTD 13