Table of Contents
Advertisement
Advanced operation
OSD Position Control Menu
The available settings are:
•
H Position: Adjust OSD H Position (Range 0 - 100)
•
V Position: Adjust OSD V Position (Range 0 - 100)
•
Background: Adjust Transparency of OSD Background (Range 0 - 20)
•
OSD Time Out: Adjust OSD Time Out - 5 sec, 10 sec, 15 sec, 20 sec, 1 min, 2 min
•
Language: OSD Language - English, Japanese, Chinese, Korean, French, German
•
Exit: Exit the Menu
Screen Control Menu
The available settings are:
•
H Position: Adjust Screen H Position (Range 0 - 100)
•
V Position: Adjust Screen V Position (Range 0 - 100)
•
Frequency: Adjust Frequency (Range 0 - 100)
•
Phase: Adjust Phase (Range 0 - 100)
•
Noise Reduction: Adjust Noise Reduction (Range 0 - 31)
•
Motion Offset: Adjust Motion Offset (Range 0 - 100)
Exit: Exit the Menu
Information
The available settings are:
•
Custom Entry: Change the User or Monitor's Name
•
SN: Display the Serial Number
•
Runtime: Display the Total Runtime
•
Input Format: Display the Current input Resolution and Vertical Frequency
•
Noise Reduction: Adjust Noise Reduction (Range 0 - 31)
•
Exit: Exit the Menu
Power Management Function
The monitor is equipped with a power management function, which automatically reduces the power
consumption when not in use in three power level modes.
•
Standby Mode: The monitor goes into standby mode when the horizontal sync signal is off for about 10
seconds. In this mode, the screen goes off and the power LED blinks for 1 second On and 1 second Off.
The screen is displayed after the horizontal sync signal is restored.
•
Suspend Mode: The monitor goes into suspend mode when the vertical sync signal is off for about 10
seconds. The power consumption during this is 10 W. In this mode, the screen goes off and the power LED
blinks for 1 second On and 1 second Off. The screen is displayed after the vertical sync signal is restored.
•
Off Mode: The monitor goes into power-off mode when the vertical and horizontal sync signals are off for
about 10 seconds. In this mode, the screen goes off and the power LED blinks for 1 second On and 1
second Off. The screen is displayed after the vertical and horizontal sync signals are restored.
The AMM215WTD Medical Monitor power management proposal provides four phases of power saving
modes by detecting the horizontal sync signal as shown in the table below.
State
Horizontal Sync
Vertical Sync
Video
4:
Available for VGA, SDI, Component
5:
Available for VGA
22
R5912860 /13
AMM215WTD
5
Normal Operation
DPMS Standby
Active
Active
Active
4
4
5
DPMS Suspend
Inactive
Active
Active
Inactive
Blanked
Blanked
DPMS Off
Inactive
Inactive
Blanked
Advertisement
Table of Contents
Troubleshooting
