Page 1
Part #13689 PLASMA CUTTING GUIDE INSTRUCTIONS...
Page 2
• Read Plasma Cutter’s Instruction Manual before attempting to use. 1. To confi gure the Eastwood Plasma Cutting Guide for Circles and radii cutting, install the rod • DO NOT use without protective gloves, and long sleeve shirt or jacket.
Page 3
° Increase Air Pressure but do not exceed 60psi. ° Decrease travel speed of torch. If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.345.1178...