Table of Contents
Advertisement
AUDIO
If the label faces down, the disc cannot be played. In this case,
"ERROR1" and disc number appear on the display.
D Setting all the discs:
1. Push the "LOAD" button until you hear a beep.
2. When the amber indicators of the slot start blinking, the
"WAIT DISC" appears on the display. After the indicators
blinking amber change to the green and stay on, the
"WAIT DISC" changes to the "LOAD DISC" on the display.
While the green indicators stay on, insert only one disc.
After inserting the disc, the amber indicators of the slot
start blinking and the "WAIT DISC" appears on the display
again. After the "WAIT DISC" changes to the "LOAD
DISC", you can insert the next disc. Repeat this procedure
until you insert all the discs.
To cancel the operation, push the "LOAD" or "DISC" button.
If you do not insert the discs within 15 seconds after pushing
the "LOAD" button and "LOAD" is displayed, the operation will
be canceled automatically.
NOTICE
Do not insert one disc stacked on top of another one or
feed them in continuously, to prevent discs from getting
stuck in the player.
212
SV22063
D Ejecting a single disc:
1. Push the button under the "DISC
signal on the display to display the disc number you want
to eject.
2. Push the "EJECT" button briefly.
At this time, the display shows "EJECT", and the indicators at
both ends of the slot as well as the disc number light up.
D Ejecting all the discs:
Push the "EJECT" button until you hear a beep.
However, if you accidentally pushed the "EJECT" button, push
the "DISC" or "LOAD" button to insert the disc again.
Do not push in the disc which is being ejected forcibly.
2003 IS300 from Aug. '02 Prod. (OM53439U)
" or "DISC
"
Advertisement
Table of Contents
