Table of Contents
Advertisement
AIR CONDITIONING
SETTING OPERATION – manual control
If manual air flow selection is desired –
SV21017
The outlets from which air is delivered can be selected
manually by pushing the button. The function of each mode is
as follows:
1
Panel – Air flows mainly from the instrument panel vents.
2
Bi–level – Air flows from both the floor vents and the
instrument panel vents.
3
Floor – Air flows mainly from the floor vents.
4
Floor/Windshield – Air flows mainly from the floor vents
and windshield vents.
Set the air flow control dial to the floor/windshield position
turns on the defogging function with the purpose of
clearing the front view.
Use with the air intake control positioned in fresh.
184
Press the "A/C" button for dehumidified heating or
cooling. This setting clears the front view more quickly.
5
Windshield – Air flows mainly from the windshield vents.
Set the air flow control dial to the windshield position turns
on the defogging function with the purpose of clearing the
front view.
This position allows the air intake to select FRESH
automatically. This is to clean up the front view more
quickly.
If you want to return the setting to RECIRCULATE mode,
press the air intake selector button one again.
Press "A/C" button for dehumidified heating or cooling.
This setting clears the front view more quickly.
2003 IS300 from Aug. '02 Prod. (OM53439U)
Advertisement
Table of Contents
