Table of Contents
Advertisement
If manual fan speed control is desired –
SV21023
" 1 Fan speed at low
2 Fan speed at high
The fan speed can be set to your desired speed by turning the
fan speed control dial. The higher the fan speed is, the more
air is delivered. Turning the dial to "OFF" turns off the fan.
To remove exterior windshield frost, use the high speed
setting.
If manual switching of air intake is desired –
SV21024a
The air intake control button is used to switch the air intake
between the OUTSIDE AIR mode and RECIRCULATED AIR
mode.
With the button in the OUTSIDE AIR mode, the OUTSIDE AIR
mode indicator light will come on and the system will take fresh
outside air into the vehicle.
If quick circulation of cooled air is desired, push the air intake
control
button
for
RECIRCULATED
RECIRCULATED AIR mode indicator light will come on.
For normal use, it is best to keep the air intake control button
set to OUTSIDE AIR mode. If recirculated air is used during
heating, the windows will fog up more easily.
When you adjust the airflow control dial and the fan speed
control dial to "AUTO" positions in case that the room
temperature is much higher than the set temperature, the air
intake
mode
will
be
automatically
RECIRCULATED AIR.
2003 IS300 from Aug. '02 Prod. (OM53439U)
AIR CONDITIONING
AIR.
The
changed
to
185
Advertisement
Table of Contents
