Table of Contents
Advertisement
SWITCHES
WINDSHIELD WIPER AND WASHER
SWITCH
SS12013b
" 1 Interval adjuster
2 Washer on
To turn the wipers on, move the lever down until you reach
the desired speed setting.
The ignition key must be in the "ON" position.
There are 3 settings:
"INT" position: Intermittent operation
"LO" position: Low speed operation
"HI" position: High speed operation
Twist the interval adjuster upward to increase the wiping
time interval between sweeps, and downward to decrease
it.
The wiper lever must be in the "INT" position.
32
For mist wiper operations (a single wipe), pull the lever
toward you and release it.
To make the washer squirt, push the button on the end of
the lever.
For information on adding washer fluid, see "Adding washer
fluid" on page 354.
Some models: If you push the windshield washer switch with
the headlights on, the headlight cleaner operates once
automatically.
In cold weather, warm the windshield with the defroster before
using the washer. This will help prevent icing, which could
block your vision.
The rear window and outside rear view mirror defogger
automatically turns on when you operate the wipers.
NOTICE
Do not operate the wipers if the windshield is dry. It may
scratch the glass.
2003 IS300 from Aug. '02 Prod. (OM53439U)
Advertisement
Table of Contents
