Reprogramming A Button; Operating The Homelink; Erasing The Entire Homelink - Toyota Lexus IS300 Manual

Reprogramming a button

R
Individual HomeLink buttons cannot be erased, however, to
reprogram a single button, follow the procedure "Programming
R
the HomeLink ".
(b) Operating the HomeLink
R
To operate the HomeLink , press the appropriate HomeLink
button to activate the programmed device. The HomeLink
indicator light should come on. The HomeLink
send the signal for up to 20 seconds as long as the button is
pressed.
(c) Erasing the entire HomeLink
(all three programs)
To erase all previously programmed codes at one time, press
and hold down the 2 outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase the programs stored
R
in the HomeLink memory.
D When programming the HomeLink
R
R
D Do not use this HomeLink
R
R
continues to
R
memory
INTERIOR EQUIPMENT
CAUTION
Transceiver, you may be operating a garage door or
other device. Make sure people and objects are out
of the way of the garage door or other device to
prevent potential harm or damage.
R
Universal Transceiver
with any garage door opener that lacks the safety
stop and reverse feature as required by federal safety
standards. (This includes any garage door opener
model manufactured before April 1, 1982.) A garage
door opener which cannot detect an object (signaling
the door to stop and reverse), does not meet current
federal safety standards. Using a garage door
opener without these features increases risk of
serious injury or death.
2003 IS300 from Aug. '02 Prod. (OM53439U)
R
Universal
65