Option 1 - Automatic Media Registration Adjustment - Canon varioPrint 115 Operation Manual

Option 1 - Automatic Media Registration Adjustment

Media-Specific Registration
When to do
When the media registration for a specific media is not optimal.
You can start a media-specific registration from the trays view or from the media catalog. First,
the steps of the media registration procedure are described in general.
NOTE
• The media-specific registration overwrites any automatic or manual media-specific
registration performed previously.
• You cannot perform media-specific registration for temporary media. You must add the
temporary media to the media catalogue first.
• You cannot perform an automatic adjustment for media that you can only print 1-sided,
because the adjustment procedure prints 2-sided registration sheets. Examples of 1-sided
media are tab sheets and transparency media with paper backing. For these media, you must
perform a manual media registration.
• It is recommended to perform the media registration when the list of [Scheduled jobs] is
empty. Otherwise, other jobs can start printing while the media registration takes place.
NOTE
• When the media is larger than the glass plate (larger than 420 mm (16.5") in X direction (feed
direction) and / or larger than 297 mm (11.7") in Z direction (perpendicular to the feed
direction)), you can still perform media specific registration. The information needed for the
automatic adjustment is within the range of the glass plate. You must only enter the actual
sheet size via the manual adjustment for this media. The scanner cannot detect the actual
sheet size and assumes the nominal sheet size.
Canon varioPRINT DP line
Option 1 - Automatic Media Registration Adjustment
Chapter 13 - Media Handling 321