Panasonic LP-GS Series Serial Communication Command Manual page 54

Type Name
Character entry
Character entry per trigger
Character object settings
Reference character
Applying reference character
Counter settings
Counter reset
Counter reset timing
Expiry date/time settings
Lot settings
Lot character
Registered character settings
Registered character strings
Bar code/2D code object settings
Human readable text settings
Module filling of 2D codes
Laser settings by 2D code elements
Quiet zone filling of 2D codes
54
Code Functions
STR Sets the characters of the character objects, bar
code/2D code objects.
SIN When "Characters specified by SIN command"
is set for character objects or barcode/2D code
objects, input characters with this command. Send
this command per each marking.
STC Sets the position and size of the character object
and conditions including text characteristics.
SST Sets the characters strings as the "reference
character" which can be used in several character
objects commonly.
LNO Applies the preset reference characters to the
specified character object.
CNT Configures the "counter" function used to mark
consecutive numbers.
CTR Resets the current value to the starting value.
CRC Sets the timing to reset the counter automatically.
LMT Configures the "expiry" function used to mark the
date with a specified period added or subtracted
to/from the current date.
LTC Configures the "Lot" function used to change
characters depending on the date/time and
counter values.
LTS Sets the characters used with the "Lot" function
to change characters depending on the date/time
and counter values.
RKC Sets the input format of the "Registered
characters" function used to switch characters by
I/O input.
RKS Sets the character string used with the "Registered
characters" function that switches characters by I/
O input.
BRF Sets the conditions such as the position and
size of the bar code/2D code as well as code
characteristics.
BRV Sets the character conditions to mark the
character strings of bar code/2D code as the
human readable text.
BRT Sets the filling details of the 2D code modules.
BRP Sets the laser settings and filling details by each
element of the 2D code.
BRQ Sets the filling details of the 2D code quiet zone.
ME-LPGS-SR-5
Refer
(P.75)
(P.77)
(P.80)
(P.83)
(P.84)
(P.85)
(P.86)
(P.87)
(P.88)
(P.89)
(P.90)
(P.92)
(P.93)
(P.94)
(P.104)
(P.106)
(P.109)
(P.111)