Object Marking Specification: Ena - Panasonic LP-GS Series Serial Communication Command Manual

3-10-3 Object marking specification: ENA

Sets whether or not to mark the object of the specified number or data in the object group.
⿎ Setting request data
Start
ENA
code
⿎ Readout request data
Start
ENA
code
⿎ Response data for readout
Start
ENA
code
⿎ Data description
Name
Object category
Object (group) No.
Marking ON/OFF
Total data length
* Setting request data are variable length.
⿎ Example of command settings
Condition: Object category = 0, Object No. = 5, Marking ON/OFF = 0, Object No. = 6, Marking ON/OFF = 1
• Setting
Transmission data
Condition: Object category = 0, Object No. = 5
• Readout
Transmission data
Response data
122
[Object category], [Object (group) No.],
S [Marking ON/OFF]
(, [Object (group) No.], [Marking ON/OFF])
[Object category], [Object (group) No.]
R
[Object category], [Object (group) No.],
A [Marking ON/OFF]
Data length
[byte]
"0": Object
1
"1": Object group
Max. 4* "0000"–"1999"
"0": Marking OFF
1
"1": Marking ON
It is the length including the separator ",".
The maximum value that can be set to one object number or object group
Max. 8
number.
Max. 32 objects or object groups can be set at once.
[STX] ENA
[STX] ENA
[STX] ENA
Max. 6-byte
8-byte
Data contents
S 0,5,0,6,1 [CR]
R 0,5 [CR]
A 0,0005,0 [CR]
ME-LPGS-SR-5
(Check sum) End code
(Check sum) End code
(Check sum) End code
Remarks