Adjusting The Audio Quality - Toshiba 26AV500U Owner's Manual

To listen to stereo sound:
1 MENU
Press © and open the Audio menu.
2 Highlight MTS
3 Press _ or @ to select Stereo, SAP and Mono.
Stereo->SAP->Mono->Stereo
Stereo
Reset
Note:
* Youcan typically leave the TVin Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
, If the stereo sound is noisy, select Mono to reduce the
noise.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only on
those TV stations that offer it. For example, a station might
broadcast another language as a second audio program.
If you have SAP on, you will see the current program on the
screen but hear the other language instead of the program's
normal audio.
If you have SAP on and the station you are watching is
not broadcasting a second audio program, the station's
normal audio will be output. However, occasionally there is
no sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
To listen to an alternate language on an ATSC digital
station (if available):
MENU
Press O and open the Audio menu.
2 Highlight Language.
3
Press _" or _ to select English, Frangais and Espafiol.
English -'>Franc;sis --> Espafiol -'>English
Adjustingthe audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1 Press M_,U and open the Audio menu.
Highlight the item you want to adjust (Bass, Treble, or
Balance).
3
Press _, a new- adjustment bar will appear as below-.
Reset
4
5
Press _11 or I_ to adjust the level.
* _ makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
* _ makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
Press @ to save and back to previous menu icon, or
Press EXtc] to save and quit system menu.
37