Switching Between Two Channels Using Channel Return; Switching Between Two Channels Using; Selecting The Picture Size; Theater Settings - Toshiba Regza42RV535U Owner's Manual

Switching between two channels using
Channel Return
The Channel Return feature allows you to switch
between two channels without entering an actual
channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (@) button if needed).
3 Press CH~TN on the remote control. The previous
channel will display. Each time you press
CH8N,
the
TV will switch back and forth between the last two
channels that were tuned.
Note: If you press
CH~TN
from
a
non-antenna input, the TV
will return to the last-viewed input.
Switching between two channels using
SurfLock™
The SurfLock H
'
feature temporarily "memorizes" one
channel to the
CH~
button, so you can return to that
channel quickly from any other channel by pressing
CH~TN.
To memorize a channel to the
CH~TN
button:
1
Tune the TV to the channel you want to program
into the
CH8N
button.
2
Press and hold
CH8N
for about 2 seconds until the
message "Memorized" appears on-screen. The
channel has been programmed to the
CH~TN
button.
3
You can then change channels repeatedly, and when
you press
CH8N,
the memorized channel will be
tuned.
The TV will return to the memorized channel one time
only. Once you press
CH~TN
and then change channels
again, the CH RTN memory will be cleared and the
button will function as Channel Return, by switching
back and forth between the last two channels that are
tuned.This feature also works for external inputs.
I
40
Selecting the picture size
You can view many program formats in a variety of
picture sizes-Natural, TheaterWide 1, TheaterWide 2,
TheaterWide 3, Full, 4:3 HD, Native and Dot by Dot.
Note: The "picture size" illustrations are examples only. The
format of the image (in any of the picture sizes) will vary
depending on the format of the signal you are currently
watching. Select the picture size that displays the current
program the way that looks best to you.
You can save separate picture size preferences for each
input on your TV.
To select the picture size using the remote control:
1
Press
P,cc3IZE
on the remote control.
2
While the Picture Size screen is open, you can do
one of the following to select the desired picture size:
• Repeatedly press
P,cc3IZE.
• Press the corresponding Number button (0-6)
while the
Picture Size
screen is open.
• Press ... or
~
while the Picture Size screen is
open.
To select the picture size using the menus:
1
From the Video menu, highlight Theater Settings
and press@.
2
Highlight
Picture Size
and press .... or ~ to select the
desired picture size setting.
3
Highlight Done and press
@.
Note: Some of the picture sizes may not be available
depending on the receiving signal format.
Using these functions to change the picture size (Le.,
changing the heighV width ratio) for any purpose other than
your private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
Note: If you select one of the TheaterWide@ picture sizes, the
top and bottom edges of the picture (including subtitles or
captions) may be hidden. To view the hidden edges, either
scroll the picture (TheaterWide
2
and 3 only) or try viewing the
program in Full or Natural picture size.