Connecting A Digital Audio System; Connecting An Audio System - Toshiba Regza 40XV645U Owner's Manual

Connecting a digital audio system

The TV's DIGITAL AUDIO OUT terminal outputs a
®
Dolby * Digital or 2-channel down-mixed PCM
(pulse-code modulation) signal for use with an external
Dolby ® Digital decoder or other external audio system
with optical audio input.
You will need:
•optical audio cable (Use an optical audio cable that has
the larger "TosLink" connector and not the smaller
"mini-optical" connector.)
Dolby Digital decoder or
other digital audio system
Optical
LINE IN
Audio IN
L R
TV upper back panel
To control the audio:
1
Turn on the TV and the digital audio device.
2
Press Y on the remote control to open the SETUP
menu.
3
Press B or b to select AV Connection and press T.
SETUP
Menu Language
ANT/CABLE In
Auto Tuning
Manual Tuning
TV Settings
Manual Setting
AV Connection
PC Settings
4
Press B or b to select Digital Audio Output, and
then press C or c to select either Auto or PCM
(- "Selecting the optical audio output format" on
page 43).
AV Connection
PC/HDMI 1 Audio
HDMI 1 Audio
HDMI Settings
Digital Audio Output
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may
not work properly, creating a high noise level that may
Chapter 2: Connecting your TV
English
Antenna
PC
Digital
Auto
damage speakers or headphones. THIS DAMAGE IS
NOT COVERED BY YOUR WARRANTY.
• The DIGITAL AUDIO OUT terminal may not output
some digital audio sources because of copy
restrictions.
• The Dolby Digital format is only available when tuned to
a digital RF channel.
* Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are trademarks of Dolby
Laboratories.

Connecting an audio system

This connection allows you to use external speakers
with an external analog audio amplifier to adjust the
sound level.
You will need:
•standard audio cables
Analog audio amplifier
LINE IN
L R
TV upper back panel
To control the audio:
1
Turn on the TV and the stereo amplifier.
2
Minimize the sound volume from the TV's built-in
speakers and control the volume level using the
amplifier's remote control.
17