Setting Channel Skip; Setting Video Input Skip; Labeling Video Input Sources - Toshiba Regza 40XV645U Owner's Manual

Setting channel skip

To prevent certain channels from being viewed,
channel positions can be skipped.
1
From the SETUP menu, highlight TV Settings and
press T.
2
Press B or b to select Channel Options and press
T. The list of channels will appear.
Channel Options
Ch. Type
DTV
5-1
6
ATV
6-1 DTV
8 ATV
9
ATV
ATV
10
11 ATV
12 ATV
3
Press B or b to select a channel position to be
skipped and press T. A tick will appear in the box.
To remove the tick, press T again.
Note: Skipped channels cannot be selected with
however, they can still be accessed using the number keys
on the remote control.
Chapter 5: Setting up your TV

Setting video input skip

If you set a video input source to be skipped, it will be
skipped over when selecting the input by repeatedly
pressing +.
To turn on the skip:
1
Tune to the video input source to be skipped.
2
From the SETUP menu, highlight Manual Setting
and press T. The setting window will appear.
3
Press B or b to select 8 (skip on) and press O.
Manual Setting
Skip: On
Video 2
To turn off the skip:
1
Select the video input that is set to skip by direct
number entry or by using B or b and then press T.
2
From the SETUP menu, highlight Manual Setting
< or ,
;
and press T. The setting window will appear.
3
Press B or b to select ( (skip off) and press O.

Labeling video input sources

You can label video input sources.
1
Tune to the input you want to label.
2
From the SETUP menu, highlight Manual Setting
and press T. The setting window will appear.
3
Press c to move from the skip selection in order to
select a label, and pressB or b to put in the desired
characters and press T.
Manual Setting
Label: VCR
Video 2
4
Repeat steps 1 through 3 for other inputs.
5
To save your settings, press T.
Note: Available characters are 0-9, A-Z, (, ), *, +, –, and /.
V C R
V C R
29