Scrolling The Theaterwide ® Picture; Scrolling The Theaterwide Picture (Theaterwide 2 And 3 Only) - Toshiba TheaterWide 26HL66 User Manual

TheaterWide 3 picture size (for letter box programs
with subtitles)
The picture is stretched wider to fill the width of the screen,
•
but only slightly stretched taller.
The top and bottom edges are hidden. To view the hidden
•
areas (such as subtitles or captions), see "Scrolling the
®
TheaterWide picture" at right.
A B C D E F G - - - - - - - - - - - - - - - -
Full picture size (for 16:9 [480i, 480p] source
programs only)
If receiving a squeezed 4:3 format program, the picture is
•
stretched wider to fill the width of the screen, but not
stretched taller.
None of the picture is hidden.
•
Note:
• If you select one of the TheaterWide
and bottom edges of the picture (including subtitles or
captions) may be hidden. To view the hidden edges, either
scroll the picture (TheaterWide 2 and 3 only) or try viewing
the program in Full or Natural picture size.
• The "picture size" illustrations are examples only. The format
of the image (in any of the pictures sizes) will vary
depending on the format of the signal you are currently
watching.
Chapter 5: Using the TV's features
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
TheaterWide 3 picture size example
Full picture size example
®
picture sizes, the top
Scrolling the TheaterWide
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1
Press Y and open the Video menu.
2
Highlight Theater Settings and press T.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Navigate ENTER Select
3
In the Picture Size field, select either TheaterWide 2
or TheaterWide 3 (you cannot scroll in any other mode).
4
Press b to highlight the Picture Scroll field.
5
Press C or c to scroll the picture up and down as needed,
from –10 to +20.
Theater Settings
Picture Size
Picture Scroll
Cinema Mode
Auto Aspect Ratio
Reset
6
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
® picture
CH RTN Back EXIT Exit
TheaterWide 2
-5
Film
On
Done
27